Generally, the ring lock scaffolding consists of vertical poles, horizontal poles, vertical diagonal poles and some small accessories. Each accessory can have different product sizes and specifications according to different needs. 1.Pole The vertical pole is welded with a disc, and there are eight holes on the disc, four of which are small holes for the horizontal pole and four holes for the inclined pole. Vertical poles are generally made of materials such as Q355B, Q355, Q235, etc., with lengths ranging from 0.2 meters to 3.0 meters. The surface generally adopts hot-dip galvanizing and painting processes. 2. Crossbar Adopting a standardized self-locking latch design, the crossbar joint is particularly dependent on the arc manufacturing of the tube and is in positive contact with the vertical pole steel pipe. After the latch is tightened, it is stressed at three points, which can be firmly fixed and the structural strength of the Zeng family is transmitted. horizontal force. Fully automatic professional welding process, length ranging from 0.3 meters to 3 meters.

Standard three-wave guardrail board specifications: 4320mm×506mm×85mm×3mm/4mm The standard section uses 250 guardrail panels per kilometer. The column spacing is 4 meters, and 250 columns are used per kilometer, with 2 ends, 250 column caps, 250 anti-blocking blocks, 250 sets of connecting bolts, and 2,000 sets of splicing bolts. Corrugated guardrail panels . Highway guardrails also have nine-hole plates, ten-hole plates, etc., depending on the connectors. These have different specifications and sizes. The same thing as the two-wave guardrail is that reinforced guardrails can be used in necessary dangerous sections. To achieve the role of anti-collision protection. In addition, each corrugated guardrail board has certain accessories, and they also have their own standards according to different corrugated guardrails. The accessories of the highway guardrail board include: 70*310* thickness bracket, 178*196*200* thickness Anti-blocking blocks, etc.

The advantages of hot-dip galvanized photovoltaic brackets are: long-lasting: in a slightly dry environment, the standard hot-dip galvanized thickness can be maintained for forty or fifty years, and in a humid environment, the anti-rust layer can be maintained for twenty Years; Good corrosion resistance: The implementation of reasonable hot-dip galvanizing specifications ensures the minimum thickness of the zinc layer and enhances the degree of corrosion resistance; the coating has strong toughness: the metallurgical combination of the galvanized layer and the steel layer forms a tough endurance With its strong metallurgical structure and other advantages, it has great value and advantages in the process of solid and liquid energy transportation. Therefore, hot-dip galvanized photovoltaic brackets are favored by most users. The main reason is that their high wear resistance, long-lasting corrosion resistance, and strength and toughness are all good choices.